Product Description

Kiln - from 0 to 7 rpm  Kiln: *4 metres long 3, **0 metres diameter x *5mm thick  Certified shell thickness above *5% intact manufactured from creeping steel  3 bearing stations – oil hub system  Table feeder: ****5 t/p/h  Discharge shute  Feed system: bucket elevator *7 t/p/h  Pugmill: *7 t/p/h *2 metres cubed  Drive and pony drive gearbox  DC drive motor: **0KW slip ring motor **0rpm  2 wet scrubbers complete  4 dry cyclones (dust)  Complete motors and ducting for scrubbers and cyclones  3 donkin fans: **5KW motors **5volt speed **2rpm  Drop out box  Soda ash hopper *0 metres cubed  *8 metre high stack: 1.5 metre diameter  Kiln dish hopper  Thrust rollers  Support steelwork Cooler  With lifting bars: *0 metres long 2.5 metres diameter  Drive gearbox and motor: *5KW ***0rpm  2 x Bearing stations  2 x Thrust rollers  Support steelwork General  Slope 3° angle  Feed ****5 tons depending on retention time at 1.1rpm  Kiln **7rpm  Low ash coal fired kiln  Heat with oil up to **0°C  **0°****0°C with coal  Working temp ***0°C: 1.1rpm feed *2 t/p/h for cr³  Running with one donkin fan at –3kpa negative pressure to standby  Kiln and cooler shell in good condition